Description
Schneider Energy Analyzer Product Features Series : EasyLogic Product name : EasyLogic PM2100 Product group : PM2120 Product or component type : Power meter Supplementary Features Device application : Sub-billing Power monitoring Power quality analysis : Total harmonic distortion Up to the 15th harmonic Type of measurement : Apparent power min/max, total Active and reactive power min/max, total Current min/max, avg Voltage min/max, avg Frequency min/max, avg Total current harmonic distortion THD (I) per phase Total voltage harmonic distortion THD (U) per phase Power factor min/max, avg Apparent energy total Active and reactive energy total Measurement type: Current I, I1, I2, I3 Peak demand power PM, QM, SM Active, reactive, apparent energy (signed, four quadrant ) Peak average currents Effective power P, P1, P2, P3 Calculated neutral current Voltage U, U21, U32, U13, V, V1, V2, V3 Unbalance current Reactive power Q, Q1, Q2, Q3 Demand power P, Q, S Apparent power S, S1, S2, S3 Accuracy class: Class 1 active energy conforming to IEC 62053-21 Class 1 reactive energy conforming to IEC 62053-24 Class 5 harmonic distortion (I THD and U THD) Measurement accuracy: Apparent power +/ – 1 % Active energy +/- 1 % Reactive energy +/- 1 % Effective power +/- 1 % Voltage +/- 0.5% Power factor +/- 0.01 Current +/- 0.5% Frequency +/- 0.05% Measurement current: 5?6000 mA Measurement voltage: 35?480 V AC 50/60 Hz between phases 20?277 V AC 50/60 Hz between phase and neutral 480?999000 V AC 50/60 Hz with external VT Frequency measurement range : 45?65 Hz [Us] nominal supply voltage : 44…277 V AC 45…65 Hz +/- 10 % 44…277 V DC +/- 10 % Mains frequency : 50 Hz 60 Hz Local signaling : 100 ms 120 V AC typical 400 ms 230 V AC typical 50 ms 125 V DC typical [In] nominal current : 1 A 5 A Power consumption in VA : 6 VA at 277 V AC Power consumption in W : 3.3 W (power lines (AC)) 2 W at 277 V (power lines (DC)) Input impedance: Current (impedance 5 MOhm) Tamper-proof of settings: Protected by access code Display type: 7 segments LED Display colour: Red Message display capacity: 3 fields of 4 characters Display digits: 12 digit(s) – 14.2 mm Demand intervals: Configurable from 1 to 60 min Displayed information: Demand current (past value) Demand current (present value) Demand power ( past value) Demand power (present value) Voltage Current Frequency Energy consumption Harmonic distortion Power factor Effective power Apparent power Reactive power Unbalanced in % Control type: 3 x buttons Local signaling: Red LED: output signal 1…9999000 pulse/ k_h ( kWh, kVAh, kVARh) Green LED: module operation and integrated communication Number of inputs : 0 Number of outputs : 0 Communication port protocol : Modbus RTU at 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps even/odd or none – 2 wire, insulation 2500 V Communication port support: Screw terminal block: RS485 Data recording: Time stamp Min/max for 8 parameters Available function: Real time clock Sampling rate: 64 samples per cycle Cybersecurity: Enable/disable communication ports Communication service:Remote monitoring Product certifications: Conforming to CE IEC 61010-1 Conforming to CULus UL 61010-1 Conforming to CULus CSA C22.2 No 61010-1 RCM EAC C-Tick Mounting Type: Pluggable Mounting position: Vertical Mounting support: Trunk Equipment provided: 1 x Installation Manual Measurement category: Category III 480 V Category II 480?600 V Electrical insulation class: Double insulation Class II Flame retardant: V-0 conforming to UL 94 Connections – terminals: Current transformer: screw connection (bottom) 6 Voltage inputs : screw connection (top) 4 Material : Polycarbonate Width : 96 mm Depth : Total: 76.09 mm Built-in: 61.64 mm Height : 96 mm Product weight : 300 g Compatibility code : PM2120 Environmental Conditions Service life : 7 yr IP protection degree: Front: IP54 conforming to IEC 60529 Body: IP30 conforming to IEC 60529 Relative humidity: 5?95 % at 50 ?C Pollution degree: 2 Ambient air temperature for operation: -10?60 ?C Storage ambient conditions: -25 ?70 ?C Working altitude: