Description
Schneider Energy Analyzer Product Features Series : EasyLogic Product name : EasyLogic PM2100 Product group : PM2110 Product or component type : Power meter Supplementary Features Device application : Power monitoring Sub-billing Power quality analysis : Total harmonic distortion Type of measurement : Total current harmonic distortion THD (I) per phase Total voltage harmonic distortion THD (U) per phase Apparent energy total Active and reactive energy total Apparent power total Active and reactive power total Current average Voltage average Frequency average Power factor average Accuracy class: Class 1 active energy ‘ conforming to IEC 62053-21 Class 1 reactive energy conforming to IEC 62053-24 Measurement accuracy: Apparent power +/- 1 % Active energy +/- 1 % Reactive energy +/- 1 % Effective power +/- 1 % Voltage +/- 0.5% Power factor +/- 0.01 Current +/- 0.5% Frequency +/- 0.05% Measurement current: 5?6000 mA Measurement voltage: 35?480 V AC 50/60 Hz between phases 20?277 V AC 50/60 Hz between phase and neutral 480?999000 V AC 50/60 Hz with external VT Frequency measurement range: 45?65 Hz [Us] nominal supply voltage: 44?277 V AC 45?65 Hz +/- 10 % 44…277 V DC +/- 10 % Mains frequency: 60 Hz 50 Hz Local signaling: 100 ms 120 V AC typical 400 ms 230 V AC typical 50 ms 125 V DC typical Rated current (Ir) : 5 A 1 A Power consumption in VA : 6 VA at 277 V AC Power consumption in W : 3.3 W (power lines (AC)) 2 W at 277 V (power lines (DC)) Input Impedance : Current (impedance 5 MOhm) Tamper resistance of settings: Protected by access code Display type: 7 segments LED Display colour: Red Control type: 3 x buttons Local signaling: Red LED: output signal 1…9999000 pulse/ k_h (kWh, kVAh, kVARh) Green LED: module is running (RUN) Number of inputs: 0 Number of outputs: 1 pulse Pop parameter: 20 ms (5…40 V DC, 20 mA 1…9999000 pulse/ k_h (kWh, kVAh, kVARh) Pulse duration: 20 ms Communication port protocol: POP Sampling rate: 64 samples per cycle Cybersecurity: Enable/disable communication ports Product certifications: CE conforming to IEC 61010-1 CULus conforming to UL 61010-1 CULus suitable CSA C22.2 No 61010-1 RCM EAC C-Tick Mounting Type: Pluggable Mounting position: Vertical Mounting support: Trunk Equipment supplied: 1 x Mounting Manual Measurement category: Category III 480 V Category II 480?600 V Electrical insulation class: Double insulation Class II Flame retardant: V-0 conforming to UL 94 Connections – terminals: Current transformer: screw connection (bottom) 6 Voltage inputs: screw connection (top) 4 Material: Polycarbonate Width: 96 mm Depth: Total: 76.09 mm Built-in: 61.64 mm Height: 96 mm Product weight: 300 g Compatibility code: PM2110 Ambient Conditions Service life: 7 yr IP protection degree: Front: IP54 conforming to IEC 60529 Body: IP30 conforming to IEC 60529 Relative humidity: 5? 95 % at 50 ?C Pollution degree: 2 Ambient air temperature for operation: -10?60 ?C Storage ambient conditions: -25?70 ?C Operating altitude: