Description
Schneider Soft Starter Product Features Product series: Altistart 22 Product or component type: Softstarter Product destination: Asynchronous motors Product-specific application: Pumps and fans Component name: ATS22 Network number of phases: 3 phases [Us] nominal supply voltage: 230…440 V – 15…10 % Motor power kW: 11 kW 230 V 22 kW 400 V 22 kW 440 V Factory setting current: 42 Power dissipation in AW: 48 W for standard applications Usage category: AC -53A Starting type : Torque controlled starting (current limited to 3.5 In) IcL starter rating : 47 A for connection in the motor supply line IP degree of protection for standard applications : IP20 Supplementary Features Mounting style : With heat sink Available function : Internal bypass Supply voltage limits: 195?484 V Supply frequency: 50…60 Hz – 10…10 % Mains frequency: 45…66 Hz Device connection: To motor delta terminals On motor supply line Control circuit voltage: 230 V – 15. ..10% 50/60 Hz Control circuit consumption: 20 W Number of digital outputs: 2 Digital output type: Relay outputs R1 230 V operating, alarm, tripping, stopped, not stopped, starting, ready C/O Relay outputs R2 230 V operating , alarm, tripping, stopped, not stopped, starting, ready C/O Minimum switching current: 100 mA at 12 V DC (relay outputs) Maximum switching current: 5 A 250 V AC resistive 1 relay outputs 5 A 30 V DC resistive 1 relay outputs 2 A 250 V AC inductive 0.4 20 ms relay outputs 2 A 30 V DC inductive 7 ms relay outputs Number of digital inputs: 3 Digital input type: (LI1, LI2, LI3) logic, 5 mA 4.3 kOhm Digital input voltage: 24 V = 5 mA Output current: 0.4…1 Icl adjustable PTC probe input: 750 Ohm Communication port protocol: Modbus Connector type: 1 RJ45 Communication data connection: Serial Physical interface: RS485 multiple socket Transmission speed: 4800, 9600 or 19200 bps Installed device: 31 Protection type: Phase failure: line Thermal protection: motor Thermal protection: starter Marking: CE Type of cooling: Forced convection Operating position: Vertical +/- 10 degrees Height: 265 mm Width: 130 mm Depth: 169 mm Product weight: 7 kg Motor power range AC-3: 7?11 kW at 200?240 V 3 phase 15?25 kW at 380?440 V 3 phase Motor starter type: Soft starter Environmental Conditions Electromagnetic compatibility : Conducted and radiated emissions level A conforming to IEC 60947-4-2 Quenching oscillatory waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 Immunity to electric currents conforming to level 4 IEC 61000- 4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Voltage/current surge level 3 conforming to IEC 61000-4-5 Standards : EN/IEC 60947-4-2 Product certifications : CCC C-Tick UL GOST CSA Vibration resistance: 1 gn (f= 13?200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f= 2?13 Hz) conforming to EN/IEC 60068-2-6 Impact resistance : 11 ms for 15 gn conforming to EN/IEC 60068-2-27 Noise level : 45 dB Pollution degree :Level 2 conforming to IEC 60664-1 Relative humidity: 0?95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 Ambient air temperature for operation: -10?40 ?C (without) 40?60 ?C (with 2.2% current drop per ?C) Storage ambient conditions: -25?70 ?C Operating altitude: 1000…< 2000 m with 2.2% current drop per additional 100 m